Paddle Board Valve: Troubleshooting Tips for a Non-Closing Valve

Whether you're a seasoned paddle boarder or a beginner ready to hit the open waters, there's nothing more frustrating than dealing with unexpected equipment malfunctions. One such issue that may arise during your paddle boarding adventures is a valve that refuses to close properly. Fear not, as every board is equipped with a trusty repair kit, containing the essential valve tightener. By utilizing this tool and giving the valve a good twist, you can ensure it locks securely back into place, alleviating any concerns that may have arisen. With this simple solution at your disposal, you can swiftly resume your paddle boarding journey without any worries of leakage or disruption.

How Do You Inflate a Paddle Board Valve?

Once the hose is securely in place, start pumping air into the paddle board using a smooth and steady motion. Apply consistent pressure and observe the gauge on the pump to measure the PSI (pounds per square inch) as you inflate. Keep in mind the recommended PSI for your specific paddle board model.

As you pump, you’ll feel resistance in the handle of the pump, indicating that you’re adding air to the board. Continue pumping until you reach the desired PSI level. It’s essential to avoid over-inflating the paddle board, as it can lead to damage or reduced performance.

Once you reach the desired PSI, carefully remove the pump hose from the valve by twisting it counterclockwise and pulling it out gently. Be cautious not to release any excess air when removing the hose.

To ensure a proper seal, make sure to close the valve cap tightly by twisting it clockwise. This will prevent any air from escaping and maintain the inflation of your paddle board.

Before hitting the water, double-check the firmness of your paddle board by pressing down on different areas. It should feel properly inflated and rigid. If you notice any soft spots or areas that seem under-inflated, you may need to re-inflate those sections.

By following these steps, you can easily inflate your paddle board using a hand pump and get ready for an enjoyable experience on the water.

How to Choose the Right Pump for Inflating a Paddle Board

When choosing a pump for inflating a paddle board, there are a few factors to consider. First, you’ll want to check the recommended PSI (pounds per square inch) for your paddle board. Make sure the pump you choose can reach that PSI. Second, consider the type of pump. Manual pumps require physical effort, while electric pumps are more convenient but may be pricier. Third, think about portability. If you’ll be inflating your paddle board away from a power source, a portable or rechargeable pump may be a better option. Finally, consider functionality and ease of use. Look for features like a built-in pressure gauge or dual action capability, which can make inflating the paddle board more efficient. Remember to choose a pump that suits your specific needs and is compatible with your paddle board.

You can trust the Halkey Roberts valve to keep your paddleboard inflated and secure, ensuring that your boarding experience remains smooth and worry-free.

What Type of Valve Is on a Paddleboard?

The Halkey Roberts valve is a two-part valve system consisting of an inner valve and an outer cap. To inflate the paddle board, you simply unscrew the cap and insert the pump nozzle into the inner valve. Once the board is fully inflated, you secure the outer cap back into place to prevent any air from escaping. This valve design ensures a tight seal and reliable inflation.

One of the main advantages of the Halkey Roberts valve is it’s ability to handle high-pressure inflation. This is particularly important for paddle boards, as they require a firm and sturdy structure for stability on the water. The valves construction allows it to withstand the increased pressure without the risk of leaks or bursts.

It’s made from reliable and long-lasting materials that can withstand frequent use and exposure to water and elements. This means that you can trust this valve to hold up over time, providing you with a reliable and enjoyable paddling experience.

Pros and Cons of the Halkey Roberts Valve for Paddleboards

The Halkey Roberts valve is a commonly used valve for inflatables, including paddleboards. It’s both pros and cons that are worth considering. On the positive side, this valve is easy to use and allows for quick and convenient inflation and deflation. It also has a reliable seal to prevent air leakage. However, some users have reported issues with this valve, such as difficulty removing the pump nozzle or potential for leakage if the valve isn’t properly tightened. It’s important to weigh these factors when considering the Halkey Roberts valve for your paddleboard.


In conclusion, addressing the issue of a paddle board valve not closing can be easily remedied by utilizing the valve tightener provided in the repair kit supplied with every board. By twisting the valve tightener, the valve can be secured back into place, resolving the problem at hand. This simple solution negates the need for extensive troubleshooting or potential costly repairs, allowing users to swiftly resume their paddle board adventures.

Please watch this video on YouTube:

Scroll to Top